Bus Traffic Fever Level 5 Walkthrough and Solution
Use the verified move order, board images, and full video to clear Bus Traffic Fever Level 5.
- Objective
- Clear the radial vehicle formation
- Key challenge
- Work outside-in while the loop alternates four colors
- Guide format
- Video and board steps
- Level status
- Written guide verified
Video Walkthrough
Solution summary
Quick Answer
Remove the exposed outer yellow and orange buses first, then alternate cyan and pink as those groups reach the entrance. Keep the center buses accessible and finish the last color pair after the radial formation opens.
Overall Strategy
The vehicles form a ring around a tight center. Each outer bus you remove exposes another bus pointing in a different direction, so the color at the passenger entrance matters more than the visual ring order.
Work around the outside in short color phases. Avoid clearing a complete side of the ring if that queues a color whose passengers are still behind another group.
Starting Board
Yellow buses occupy the upper outside of the radial formation. Pink and cyan buses stand through the middle spokes, with orange buses on the lower and side edges. The passenger track alternates yellow, pink, cyan, and orange sections.
Step-by-Step Solution
Step 1
Open the radial ring with yellow and orange
Tap the exposed yellow buses on the upper outside when yellow reaches the entrance. Use the orange bus opened on the side next, but keep the inner pink and cyan spokes parked.
Step 2
Alternate cyan and pink through the spokes
Send the cyan bus from the lower spoke as cyan reaches the entrance, then use the exposed pink bus from the center. Continue alternating those colors instead of emptying one spoke completely.
Step 3
Finish the opened center with the last color pair
After the ring breaks apart, use the remaining yellow and orange buses around the outside. Clear the final cyan and pink buses from the center only when their passenger groups reach the loading point.
Before Each Move
- The bus points toward an open route.
- Its passenger color is at the entrance.
- Removing it will expose a useful inner bus.
- One loading bay remains free for the next color.
Where Players Get Stuck
The radial layout invites you to tap every bus on one side. That queues too many buses of one color. Move around the ring according to the passenger sequence and keep newly exposed center buses for their matching groups.
Bus Traffic Fever Level 5 FAQ
How do I open the Level 5 vehicle ring?
Use the exposed outer yellow buses, then the orange bus opened beside them.
Should I clear one side of the ring first?
No. Alternate sides and colors according to the passenger entrance.
When should the center buses move?
Move a center spoke only after its color reaches the passenger entrance.
What is the main Level 5 risk?
Filling the loading bays with one color before the loop reaches that passenger group.