Bus Traffic Fever Level 1 Walkthrough and Solution
Use the verified move order, board images, and full video to clear Bus Traffic Fever Level 1.
- Objective
- Load every blue, red, and yellow passenger
- Key challenge
- Keep the bus order aligned with the loop entrance
- Guide format
- Video and board steps
- Level status
- Written guide verified
Video Walkthrough
Solution summary
Quick Answer
Clear both blue buses first, send the two red buses next, and leave the two yellow buses for the final passenger group. The six buses form three color pairs, so the solution follows the color order shown at the loop entrance.
Overall Strategy
Level 1 teaches the main rule: the passenger color at the loading entrance decides which bus should enter a bay. Work through one color pair at a time instead of tapping every visible bus.
The parking area starts with enough room for the active buses, but using the wrong color leaves a bay occupied while the matching passengers remain behind another group. Follow blue, red, then yellow.
Starting Board
The passenger loop begins with a large blue group at the lower-left entrance, followed by red and yellow. The vehicle cluster contains two blue buses at the upper-left, two red buses on the right, and two yellow buses along the lower-left edge.
Step-by-Step Solution
Step 1
Send the two blue buses from the left side
Tap the exposed blue bus at the upper-left of the vehicle cluster. Send the second blue bus beside it after the first reaches the loading bays. Both buses serve the blue group already at the loop entrance.
Step 2
Move the two red buses from the right
Wait until the red passengers reach the lower entrance. Tap the two red buses on the right side of the remaining cluster. Keep the yellow pair parked below until both red buses have started loading.
Step 3
Finish with the yellow pair
Tap the two yellow buses left at the lower-left of the board. The first yellow bus opens the final passenger stream, and the second clears the remaining yellow group and completes the level.
Before Each Move
- The next passenger group matches the selected bus.
- Both buses of the current color remain accessible.
- The yellow pair stays parked until the final phase.
- The board still shows the blue-red-yellow order.
Where Players Get Stuck
Players usually tap a yellow bus while blue or red passengers still control the entrance. That yellow bus occupies a bay without loading. Restart and finish both buses of the active color before changing colors.
Bus Traffic Fever Level 1 FAQ
What is the Bus Traffic Fever Level 1 bus order?
Use both blue buses, then both red buses, then both yellow buses.
Which bus should move first in Level 1?
Start with either exposed blue bus on the left side of the vehicle cluster.
Why does a yellow bus wait in a bay?
Yellow passengers have not reached the entrance yet. Clear blue and red before sending yellow.
Does Level 1 need a booster?
No. The starting bays are enough when you follow the three color pairs in order.